Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
it:wintertrainv4:design:feature_tms [2020/01/17 22:56]
jabe [Time Table]
it:wintertrainv4:design:feature_tms [2020/01/17 23:13] (current)
jabe
Line 30: Line 30:
  
 A time table is specifying a number of routes that - when set in sequence - will allow the train to drive from a specific starting location to a specific destination. It may provide alternative routes for part of the movement. A time table will consist of a number of instructions on "how and when to set the next route"​. As a route per definition is set from a start signal facing the train, the signal name will be used as the key (or index) in the time table. A time table is specifying a number of routes that - when set in sequence - will allow the train to drive from a specific starting location to a specific destination. It may provide alternative routes for part of the movement. A time table will consist of a number of instructions on "how and when to set the next route"​. As a route per definition is set from a start signal facing the train, the signal name will be used as the key (or index) in the time table.
 +
 +For each time table //business hours// can be specified. Route setting will only be conducted within business hours. Specification of business hours is optional and defaults to start hour 00:00 and end hour 23:59
  
 Setting the next route will be triggered by the train approaching the end of the route set so far. Several conditions can be applied in order to manage the movement: Setting the next route will be triggered by the train approaching the end of the route set so far. Several conditions can be applied in order to manage the movement:
Line 37: Line 39:
   * Manual/​Confirm:​ The signaler must set the next route manually.   * Manual/​Confirm:​ The signaler must set the next route manually.
   * End: The current location of the train is the destination and no further routes will be set.   * End: The current location of the train is the destination and no further routes will be set.
-  * Next trn: The current location of the train is the destination and no further routes will be set according to this time table. The train will be assigned a new running number, but only within the business hours of the time table.+  * Next trn: The current location of the train is the destination and no further routes will be set according to this time table. The train will be assigned a new running number ​after an optional delay.
  
 An optional departure //time// or departure //delay// may be specified for the mentioned conditions (where it makes sense). An optional departure //time// or departure //delay// may be specified for the mentioned conditions (where it makes sense).
Line 44: Line 46:
  
 //Time// takes precedence over //delay//. //Time// takes precedence over //delay//.
- 
-The optional business hours of a time table is specified as start hour and end hour (specified as hour and minutes). Business hours defaults to start hour 00:00 and end hour 23:59 
  
  

it/wintertrainv4/design/feature_tms.txt ยท Last modified: 2020/01/17 23:13 by jabe